Battery Monitor v1.1 - has been released

Battery Monitor v1.1

What's new:
* Added "Update time" option
* Added "Run On Click" option
* Prepared for TLB 3.1
* Some minor changes

Download

Battery Monitor 1.2

Fixed: Explorer hang after changing properties.

Download it via live update.

Hi Yuri,

It seems that the changes works fine, but I continue to have the sames issues of the Battery Monitor v1.0...

VaMPiRiC_CRoW please be more specific. What problems? It is very hard to me find something in previous posts. If you tell about aproximation time then try to increase the Update time in the properties. Settings it into 60 or more will make more truely results.

Yuri, see this topic Battery Monitor v1.0

Please can you download program from this topic. Publish the results when power is unpluged.

Also please aswer: Are there are problems with discharging time only. Or the charging time is incorrect too?

Battery charger on AC power: NO
Battery is present: YES
Battery is charging: NO
Battery is discharging: YES
Battery maximum capacity: 57.202,00 mWh
Battery estimated remaining capacity: 50.956,00 mWh
Battery estimated rate of discharge: 0,00 mWh
Battery estimated time remaining: 1193046:28:15

I've the same problem with the charging time...

VaMPiRiC_CRoW What value do you set into "Update time" in the BM Properties?

10 seconds...

It is not enough. Try to increase this value.

It is not enough. Try to increase this value.

Do you want that I increase the value and post the results again?

What number you suggest? 15? 20?

Set value into 30-60 and see how BM work?

Also happens with this values...

Hmm, if TLB cannot determine the discharge rate even over a period of 1 minute, you must have an incredibly powerful battery! I can imagine they didn't implement it in your hardware

Just for fun, try 300 seconds... the battery must discharge enough to make a proper estimation...

It's better with 300, but it would be better if it works with a lower value...