06-09-2004, 03:09 PM -
1) Remove NoSaveSettings from registry
2) Restart
3) Open TLB
4) Restart
If TLB not loaded at this point then check again regitry maybe NoSaveSettings is again there.
BTW ernstegon you are using XP Pro then you can use gpedit.msc and change settings into "Non configured" (or Disabled). Look on attached picture.
2) Restart
3) Open TLB
4) Restart
If TLB not loaded at this point then check again regitry maybe NoSaveSettings is again there.
BTW ernstegon you are using XP Pro then you can use gpedit.msc and change settings into "Non configured" (or Disabled). Look on attached picture.
The TORDEX Team
http://www.tordex.com
http://www.tordex.com