[solved] No graphics in net monitor

No matter which skin I use, I cannot see any graphics. I see the words and numbers just fine, but no graph or bars or anything like that to show activity.

Windows XP, Averatec laptop, 640MB RAM, S3 video card.

What TLB version and Net Monitor version are you using? Can you give us a screen shot of what you are talking about?

Could you also supply us with the version numbers of XP, True Launch Bar, and Net Monitor, and also a little more detail about the video card, such as driver version and model?

Once we've got this information, we'll have a little more to go on and will be better able to assist.

TIA

[edit]Bugger! shapeshifter beat me to it![/edit]

As a matter of fact we just developed the same problem. We had no problems in the past with NetMon 1.4 using TLB 2.2.0.17 but now the only thing that seems to have changed is that we are now using TLB 2.2.0.18 RC3. Other info is: NetMon 1.4.0.0, Win 98SE 4.10.2222 A and for the skin(s) DK NetMon (others give no result as well). We have an S3 ViRGE -DX/GX PCI [375/385] & a Diamond Stealth 3D 2000 Pro [S3 ViRGE -DX 375] set of display adaptors. Drivers are from Microsoft dated 1998.

Any ideas?

Please use search on this forum.
If you can't answer here:
Use Customized Connections tab in the properties to limit bandwidth for connection. By default NM set in into connection speed but in the real life 100Mb net cannot reach top bandwidth.

QSection
Check Customized Connections tab and the name of connection in the tips. For some resones Windows can change the conection name.

We now have the solution. In the Customized connections tab we had all the connections already listed and the active connection was at the default Bandwidth limit of 'Link speed'. We changed this to 'Auto' and voila - the NetMon started to display properly.

Thank you.

Please use search on this forum.

We checked but did not find it. It may be on the forum but was not found. Sorry.

We changed this to 'Auto' and voila - the NetMon started to display properly.

This is exactly what I spoke

We now have the solution. In the Customized connections tab we had all the connections already listed and the active connection was at the default Bandwidth limit of 'Link speed'. We changed this to 'Auto' and voila - the NetMon started to display properly.

Thank you.

Thank you very much!
It's work!

Glad to hear you are back in business.